Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

About 1608 IP phone

Status
Not open for further replies.

shanghairomeo

Vendor
Joined
Jan 11, 2007
Messages
46
Location
JP
Hi,all

How can I add 1608 station in CM4.0.1?
 
4610 you can make an alias station for it as well
 
Hi ,


I have genesys CTI 6.5 version & Avaya PBX , I am getting the error mesage in T-server log as follows when i configure the extension in CME.

45678:
======
Facility: serv_discr = 17(q932_suppl) fac_ie = component_tag = A3(RETURN_ERROR)
invoke_id tag: 02, value = 117
error_value tag: 02, value = 196(Domain_Control)
params = q931_tag = 40
list =
*Cause: code_std_loc = 97(ASAI_PubNetLocUsr) cause = 63(C_SERV_UNAVIL)
*
WARNING: Registration (DC) attempt 5 of 5 failed on DN 45678.
'g3_process_negative_registration' gdi->flags=0x00000112.
14:05:13.556 Std 31032 *DN Registration Failed: Link[1], DN[45678]*
14:05:16.438 Trc 04541 RequestRegisterAddress received from 27 (3cdb ccp_stat_svr_apac_pri)
message RequestRegisterAddress
AttributeThisDN '88765'
AttributeRegisterMode 0
AttributeControlMode 0
AttributeAddressType 1 (DN)
AttributeReferenceID 6891
(tservice_proc) ControlMode set to 1 for 45678
** ts7.2.008.01[1] <TS-Primary> ** 14:05:16.4386


Can any one help me on this , thanks in advance .

Jany.
 
On CM, cha alias supported type 4610 for 1608



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top