Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

A-law tone and cadence tables

Status
Not open for further replies.
worldwidedialtone

worldwidedialtone

Technical User
Apr 9, 2004
424
US
Does anyone have a print out of LD 56 tone and cadence tables for A-law settings? Thanks in advance.

MIKE
 
Sort by date Sort by votes
Is this what you are looking for? I could be totally wrong but i wanted to see if i could help.


WCAD = DEFAULT MCAD TABLE (Master Cadence Table)

000 CDNC = 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
001 CDNC = 0410 0800 0000 0000 0000 0000 0000 0000 0000 0000
002 CDNC = 0308 0076 0308 0076 0000 0000 0000 0000 0000 0000
003 CDNC = 0205 0000 0000 0000 0000 0000 0000 0000 0000 0000
004 CDNC = 0102 0102 0205 0819 0000 0000 0000 0000 0000 0000
005 CDNC = 0100 0100 0000 0000 0000 0000 0000 0000 0000 0000
016 CDNC = 0128 0000 0000 0000 0000 0000 0000 0000 0000 0000
017 CDNC = 0051 0000 0000 0000 0000 0000 0000 0000 0000 0000
018 CDNC = 0205 3072 0051 3072 0000 0000 0000 0000 0000 0000
019 CDNC = 0205 1229 0051 1229 0000 0000 0000 0000 0000 0000
020 CDNC = 0051 0026 0051 2048 0000 0000 0000 0000 0000 0000
021 CDNC = 0410 0000 0000 0000 0000 0000 0000 0000 0000 0000
022 CDNC = 0102 0000 0000 0000 0000 0000 0000 0000 0000 0000
023 CDNC = 0512 0000 0000 0000 0000 0000 0000 0000 0000 0000

WCAD = DEFAULT FCAD TABLE (Firmware Cadence Table)

000 Cadence number in the Master Cadence table (MCAD)
CDNC = 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
001 Cadence number in the Master Cadence table (MCAD)
CDNC = 0410 0800 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO
002 Cadence number in the Master Cadence table (MCAD)
CDNC = 0308 0076 0308 0076 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1 2
SPCL = NO
003 Cadence number in the Master Cadence table (MCAD)
CDNC = 0205 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
004 Cadence number in the Master Cadence table (MCAD)
CDNC = 0102 0102 0205 0819 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1 2
SPCL = NO
005 Cadence number in the Master Cadence table (MCAD)
CDNC = 0100 0100 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO
016 Cadence number in the Master Cadence table (MCAD)
CDNC = 0100 0100 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO
017 Cadence number in the Master Cadence table (MCAD)
CDNC = 0050 0050 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO
018 Cadence number in the Master Cadence table (MCAD)
CDNC = 0010 0010 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO
019 Cadence number in the Master Cadence table (MCAD)
CDNC = 0040 0060 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO
020 Cadence number in the Master Cadence table (MCAD)
CDNC = 0015 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
021 Cadence number in the Master Cadence table (MCAD)
CDNC = 0020 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
022 Cadence number in the Master Cadence table (MCAD)
CDNC = 0020 0020 0020 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
023 Cadence number in the Master Cadence table (MCAD)
CDNC = 0060 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
024 Cadence number in the Master Cadence table (MCAD)
CDNC = 0020 0000 0020 0000 0020 0000 0000 0000 0000 0000
END = OFF
SPCL = YES
025 Cadence number in the Master Cadence table (MCAD)
CDNC = 0200 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
026 Cadence number in the Master Cadence table (MCAD)
CDNC = 0050 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
027 Cadence number in the Master Cadence table (MCAD)
CDNC = 0400 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
028 Cadence number in the Master Cadence table (MCAD)
CDNC = 0125 0000 0000 0000 0000 0000 0000 0000 0000 0000
END = OFF
SPCL = NO
029 Cadence number in the Master Cadence table (MCAD)
CDNC = 0030 0070 0000 0000 0000 0000 0000 0000 0000 0000
END = REPT
CYCS = 1
SPCL = NO

I did find this that directly referenced A-law.

3 For a cadence of:
0.1 s on at 950 Hz, 19 dB below overload A-law, 0.1 off
0.1 s on at 1400 Hz, 20 dB below overload A-law, 0.1 off
0.1 s on at 1800 Hz, 20 dB below overload A-law, steady off
REQ NEW, CHG, PRT
TYPE FCAD
WCAD 1-255
CDNC 0020 0020 0020 0020 0020
END OFF
WTON YES (define tones for this cadence)
TONES 134 135 136 (See NT8D17 Conference/TDS tone table)
 
Upvote 0 Downvote
REQ prt
TYPE ftc
TABL 1
USER

TYPE FTC
TABL 1
NCAD 001
NBCS
XTON 002
DCAD 002
DBCS
XTON 002
ICAD 005
IBCS
XTON 002
RCAD 001
RBCS
XTON 002
GCAD 001
GBCS
XTON 002
HCAD 003
HBCS
XTON 002
PCAD 001
PBCS
XTON 002
XCAD 000
NDR1 PBX 002
NDR1 BCS
XTON 002
XCAD 002
NDR2 PBX 002
NDR2 BCS
XTON 002
XCAD 002
NDR3 PBX 002
NDR3 BCS
XTON 002
XCAD 002
NDR4 PBX 002
NDR4 BCS
XTON 002
XCAD 002
DIAL
XTON 105
XCAD 000
SPCL
XTON 105
XCAD 000
CDT
XTON 105
XCAD 000
CFDT
XTON 105
XCAD 000
MWDT
XTON 105
XCAD 017
CFMW
XTON 105
XCAD 017
BUSY
XTON 164
XCAD 017
RGBK
XTON 215
XCAD 031
ARBK
XTON 011
XCAD 002
FFCT
XTON 004
XCAD 000
ACTN
XTON 004
XCAD 000
HOWL 0027
LIMT
XTON 009
XCAD 002
NRMT
XTON 009
XCAD 018
AWUT
XTON 007
XCAD 017
OVFL
XTON 164
XCAD 017
TEST
XTON 008
XCAD 000
ERWT
XTON 003
XCAD 000
ACFT
XTON 003
XCAD 000
TLP
XTON 007
XCAD 000
TLPT 0
PATI
XTON 000
XCAD 000
EEST
XTON 003
XCAD 000
ILIN
XTON 056
XCAD 002
ILOU
XTON 034
XCAD 002
LDN
XTON 000
XCAD 024
CDNC 016
DI0
XTON 003
XCAD 022
CDNC 016
HLDC
XTON 000
XCAD 024
CDNC 016
CPNC
XTON 003
XCAD 021
CDNC 017
CAMP
XTON 003
XCAD 000
CDNC 017
ACBT
XTON 003
XCAD 000
CDNC 019
AOBT
XTON 003
XCAD 000
CDNC 018
CAB
XTON 043
XCAD 019
CDNC 019
INTU
XTON 003
XCAD 000
CDNC 019
CWT
XTON 003
XCAD 000
CDNC 020
OBKT
XTON 003
XCAD 000
CDNC 017
OVRD
XTON 003
XCAD 000
CDNC 018
OHQ
XTON 003
XCAD 000
CDNC 003
SRT
XTON 003
XCAD 000
CDNC 021
TMAT
XTON 003
XCAD 000
CDNC 022
TMOT
XTON 003
XCAD 000
CDNC 023
TSUT
XTON 003
XCAD 000
CDNC 023
ABST
XTON 004
XCAD 000
CDNC 208
PNNC
XTON 000
XCAD 000
CDNC 000
SRC1
XTON 000
XCAD 000
SRC2
XTON 000
XCAD 000
SRC3
XTON 000
XCAD 000
SRC4
XTON 000
XCAD 000
SRC5
XTON 000
XCAD 000
SRC6
XTON 000
XCAD 000
SRC7
XTON 000
XCAD 000
SRC8
XTON 000
XCAD 000
CFSN
XTON 004
XCAD 000
CPOQ
XTON 003
XCAD 000
RGAR
XTON 004
XCAD 000
RPCT
XTON 004
XCAD 000
RGAB
XTON 007
XCAD 000
MWAN
XTON 004
XCAD 000
DNDA
XTON 004
XCAD 000
SSLK
XTON 004
XCAD 000
P10 8
ID1 768
ID2 512
IDD 512
IDE 384
RVDL 0
 
Upvote 0 Downvote
Thanks everyone, This should do the trick to get some "normal" sounds from the beast. Thanks again.

MIKE
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MoJHK
  • Locked
  • Question
Busy tone after hangup
Replies
1
Views
328
MoJHK
MoJHK
umts
  • Locked
  • Question
How should I get started and what should I know? 2
Replies
9
Views
1K
umts
umts
Option11PLM
  • Locked
  • Question
MGXPEC - NT8D09 cards are working but phones do not appear to be powered up & no tones (dial, ringing, etc.)
Replies
2
Views
379
dianvaguar
dianvaguar
Emara
  • Locked
  • Question
when dialing the access code and th
Replies
1
Views
421
Firebird Scrambler
Firebird Scrambler
lexer
  • Locked
  • Question
Meridian 11c and asterisk interconnection using PRI
Replies
7
Views
694
RS528
RS528

Part and Inventory Search

Sponsor

Back
Top