9620L on different subnet same LAN

[socalsteve]

IP Office 8.0.52 192.168.2.4, sonicwall Pro 3060 192.168.2.1, providor mesh network to site B (ethernet cable across town), soncwall tz210 192.168.41.1, 9620L dhcp and 192.168.2.4 for call server. from site B i can ping 192.168.2.4 and from site A i can ping 192.168.41.14 (PC at site B) the phone however cannot see 192.168.2.4 sets at discover.

 

[amriddle01]

Ports blocked/seized Sonicwalls are bast@rds for it

 

[socalsteve]

So do i just need to open ports listed in lan 1 settings for rtp?

 

[tlpeter]

Do you have an IProute in the IPO?

192.168.41.0
255.255.255.0
192.168.2.1


BAZINGA!

I'm not insane, my mother had me tested!

 

[socalsteve]

Yes and if i plug the phone in front of site b firewall it registers and works.

 

[socalsteve]

Anyone have phones working on the same LAN but different subnets?

 

[amriddle01]

Yes, on several sites, there shouldn't be any requirement to firewall between them though but as your sites are geographically separated I imagine that's the issue, it's not a true single LAN

 

[socalsteve]

Figured it out.... well the companies IT manager with the help of sonicwall support did. The remote site router was routing subnets as well as the main site router. Turned it off in remote site and the phone registered. I was pointing the finger at there routers all along but I personall opened all the ports up in remote and main routers.