9611G and CM6 2

[randyb19]

I've currently got a 9611G connected to our CM4 system, aliased as a 9640. With the display screen of the phone set to 'half-width' only the call appearances display on the main screen, while all the other administered buttons are on the back screen. Can someone please confirm if this remains the same on the latest CM6 or will more buttons be displayed on the main screen (such as a 462x set to 'half-width')?

We are in the process of having our system upgraded to CM6.

 

[simreal]

Thats typical for the 96XX phones. There is a parameter in the settings file that will allow the feature buttons to slide up onto the first page if you want though.

## Enable/disable Feature Button on Phone
##   When FBONCASCREEN is set to 1 Feature Button are also
##   displayed on Call Appearance filtered screen.
##   Default = 0. 
##  Note: This feature is available on H.323 release 3.0 only for 9630 or 9640 phones & release 6.0 for 96x1 phones..
SET FBONCASCREEN 1

- Miguel

A very wise and well respected man once told me "Shut Up!".

 

[randyb19]

I just implemented this on my CM4 and now the 9611 I have connected has feature buttons on the front screen! Thanks for the info Miguel.

 

[simreal]

You bet.


- Miguel

A very wise and well respected man once told me "Shut Up!".

 

[montyzummer]

where is the guys *

APSS (SME)
ACSS (SME)