Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9611 can't enable VPN

Status
Not open for further replies.

eddiebullman

Programmer
Jun 24, 2008
141
GB
Hi

Have put the following text at the start of the 46xxsettings.txt file but can't enable vpn client on 9611 phone
Have got a 5610 phone connected to my router fine and all working.

Router is a Netgear336Gv2

############################################################
### ###
############################################################
IF $MODEL4 SEQ 4610 goto 56XXy
IF $MODEL4 SEQ 4620 goto 56XXy
IF $MODEL4 SEQ 4621 goto 56XXy
IF $MODEL4 SEQ 5610 goto 56XXy
IF $MODEL4 SEQ 5620 goto 56XXy
IF $MODEL4 SEQ 5621 goto 56XXy
IF $MODEL4 SEQ 9608 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9611 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9620 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9621 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9630 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9640 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9641 GOTO 96XXVPNQ
IF $MODEL4 SEQ 9650 GOTO 96XXVPNQ
############################################################
### ###
############################################################
# 96XXVPNQ
IF $GROUP SEQ 0 GOTO NO96XXVPN
IF $GROUP SEQ 876 GOTO 96XXVPNY
############################################################
### ###
############################################################
# 96XXVPNY
SET NVVPNMODE 1
SET NVVPNSVENDOR 1
SET NVVPNENCAPS 0
SET NVVPNCOPYTOS 0
SET NVVPNAUTHTYPE 4
SET NVVPNUSERTYPE 1
SET NVVPNPSWDTYPE 1
SET NVVPNSWDTYPE 1
SET NVVPNPSWD ********
SET NVIKEID AvayaVPN
SET NVIKEIDTYPE 2
SET NVIKEXCHGMODE 1
SET NVIKEDHGRP 2
SET NVIKEP1ENCALG 2
SET NVIKEP1AUTHALG 1
SET NVPFSDHGRP 2
SET NVIKEP2ENCALG 2
SET NVIKEP2AUTHALG 1
SET NVIPSECSUBNET ***.***.***.*/24
SET NVIKEOVERTCP 0
SET PROCSTAT 0
SET VPNPROC 2
SET MCIPADD ***.***.***.*
SET NVVPNFILESRVR SET PROCPSWD 27238
GOTO END
# NO96XXVPN
SET NVVPNMODE 0
SET PROCSTAT 0
SET VPNPROC 2
SET PROCPSWD 27238
GOTO END
#56XXy
# END

Any ideas thanks
 
The 96x1 do not support VPN at the moment so it could be that it is removed.
If it is not removed then it won't work with the Netgear.
I have tried and failed but that was with a 9608 in the beginning.


BAZINGA!

I'm not insane, my mother had me tested!

 
You can try it.


BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top