Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

9608 and 9611 ringtone

Status
Not open for further replies.

Smovk

IS-IT--Management
Joined
Mar 7, 2003
Messages
129
Location
SI
How to configure two different ringing pattern (for internal and external calls) on 9608 and 9611 phones?
Running system is CM6.
 
Code:
When you turn on tenant partitioning, the fields are programmable differently
for each tenant rather than a system wide option.

display system-parameters customer-options                      Page   5 of  11
                                OPTIONAL FEATURES

                                                         Tenant Partitioning? y

change tenant 1                                                 Page   1 of   2

                           TENANT 1

       Tenant Description:
          Attendant Group: 1
    Ext Alert Port (TAAS):
        Night Destination:
             Music Source: 1

  Attendant Vectoring VDN:

  DISTINCTIVE AUDIBLE ALERTING
             Internal: 1   External: 2   Priority: 3
                       Attendant Originated Calls: external

                COS Group: 1

Code:
display system-parameters features                              Page   6 of  18
                        FEATURE-RELATED SYSTEM PARAMETERS
         Public Network Trunks on Conference Call: 5              Auto Start? n
    Conference Parties with Public Network Trunks: 6               Auto Hold? n
 Conference Parties without Public Network Trunks: 6          Attendant Tone? n
         Night Service Disconnect Timer (seconds): 180         Bridging Tone? n
                 Short Interdigit Timer (seconds): 3         Conference Tone? n
              Unanswered DID Call Timer (seconds):            Intrusion Tone? n
              Line Intercept Tone Timer (seconds): 30    Mode Code Interface? n
                 Long Hold Recall Timer (seconds): 0
                      Reset Shift Timer (seconds): 0
     Station Call Transfer Recall Timer (seconds): 0         Recall from VDN? n
                               DID Busy Treatment: tone

               Allow AAR/ARS Access from DID/DIOD? y
                 Allow ANI Restriction on AAR/ARS? n
      Use Trunk COR for Outgoing Trunk Disconnect? n
                  7405ND Numeric Terminal Display? n                  7434ND? y
DISTINCTIVE AUDIBLE ALERTING
             Internal: 1   External: 2   Priority: 3
                       Attendant Originated Calls: external
    DTMF Tone Feedback Signal to VRU - Connection:          Disconnection:

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top