Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
8410D add a headset ? 1
- Thread starter papagigo1
- Start date
-
1
- #2
You use a plantronics or Lucent amplifier. The amp will either go in the handset jack or plug into the aux port on the bottom. For the plantronics setups, you will need a handset lifter. For the lucent amps in the aux port, you will not need a lifter. Only a power supply.
In the future everything will work...
In the future everything will work...
phoneguy55
Programmer
You cant add a headset button to an 84XX. That feature was created for the 64XX phones. You can still use the headset, just lift the handset.
I believe you can also get an 8400 SOTA and connect that to the adjunct port on the phone.
I believe you can also get an 8400 SOTA and connect that to the adjunct port on the phone.
AT&T 502C amplifier plugged into the adjunct port is the best solution for the 84XX phones. Also requires a P10 prong plug unit.
Challenge is that these are no longer being manufactured and it's tougher and tougher to find resellers with the equipment available.
Challenge is that these are no longer being manufactured and it's tougher and tougher to find resellers with the equipment available.
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question