Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
7013-J40 microcode and aix4.2.1.06 RML
- Thread starter aixlurker
- Start date
The microcode have a look at
basically says you have to contact the hardware service person.
For tape drive , have a look at ( depends on whether it is dds2/3 etc..)
basically says you have to contact the hardware service person.
For tape drive , have a look at ( depends on whether it is dds2/3 etc..)
- Status
Similar threads
