6513 SUP 720 Redundancy

[lobo66]

Quick question I have a CAT 6513 with dual SUP 720's in slot 7 and 8 IOS ver 12.2 (18) SXD3. I was reading a Cisco Doc on configuring EHSA that states I have to have the SUP's in slot 1& 2 for the redundant operation to work??

Is this correct any thought?

THX ALL..

 

[ADB100]

The statement is applicable to Supervisor1, Supervisor2 and Supoervisor32's only. The Sup720 MUST be installed in slots 7 & 8 to work in a 6513 chassis. Redundancy is supported.

Andy

 

[lobo66]

Great thanks... also here is the config I have for Redundancy is this correct:

redundancy
mode sso
main-cpu
auto-sync running-config


THX...

 

[ADB100]

Thats the default I think. SSO is Stateful Switch Over.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/srmsso.htm

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_feature_guide09186a0080245c05.html

HTH

Andy

 

[BuckWeet]

you probably want to change the mode to NSF - non stop failover..