I may be missing something obvious, but any suggestions could help...Have a 6408+ with bridged apprs. for another users phone. cordless headset(plantronics cs50) connected to first user. When first user selects dial tone from headset it picks up the bridged appr.line not the headsets phone line? phone settings seem correct for headset. plantronics support was no help..they mentioned a priority line on phone settings but,found no such setting.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
6408+, problems with headset?
- Thread starter jopats
- Start date
phoneguy55
Programmer
If I am reading this correctly you what the headset to use the the call-appr and not the brdg-appr
On the station from page 2 change auto select any idle appearance to NO.
On the station from page 2 change auto select any idle appearance to NO.
- Status
Similar threads
