Sep 13, 2004 #1 tricie10 Technical User Jan 30, 2003 16 US Does anyone know if the built-in speaker phone on the 6400 digital series telephones is full or half duplex?
Does anyone know if the built-in speaker phone on the 6400 digital series telephones is full or half duplex?
Sep 13, 2004 #2 donbott Technical User Dec 4, 2003 719 US 6402's are listen only, the rest are all half duplex as far as I know. We use 6408's and 6416's DonBott take two of these and call me in the morning Upvote 0 Downvote
6402's are listen only, the rest are all half duplex as far as I know. We use 6408's and 6416's DonBott take two of these and call me in the morning
Sep 15, 2004 #3 soasol IS-IT--Management Jun 11, 2004 6 US It depends on how you program the station as well. Type=6408D+ you get Speakerphone: 2-way However if Type = 6408 you get Speakerphone: 1-way Hope that helps. Upvote 0 Downvote
It depends on how you program the station as well. Type=6408D+ you get Speakerphone: 2-way However if Type = 6408 you get Speakerphone: 1-way Hope that helps.
Sep 16, 2004 #4 mwarren MIS Sep 10, 2003 70 GB We have some 6408 & 24's but they don't seem to be that good at 2 way. The speaker and mic cuts out. It is possible though! Upvote 0 Downvote
We have some 6408 & 24's but they don't seem to be that good at 2 way. The speaker and mic cuts out. It is possible though!
Sep 21, 2004 #5 listhist MIS Feb 26, 2004 130 CA I don't believe there is a speakerphone made that is full duplex! Otherwise you would get feedback. Upvote 0 Downvote
Sep 21, 2004 #6 stug IS-IT--Management Jul 17, 2001 134 US It is Half duplex. I use Polycom 550d in conference rooms they are setup as 6408d+ phones. Upvote 0 Downvote