5550 ip console v4.2.2.3 &3300 v 8.0.9.20

[inlsp05]

hi
i have 3300 icp active software version 8.0.9.20
can use 5550 ip console v4.2.2.3 with3300 icp active software version 8.0.9.20 ???
i read in ip5550 manual work with3300 version 12 or newer ??
thank for your help/..

 

[sarond]

The Release Notes state the below.

3.2.1.8 For 3300 Rel 8.0
3.3.1.3 For 3300 Rel 8.0 UR3
3.3.1.5 For 3300 Rel 8.0 UR4

 

[inlsp05]

this mean in 3300 ver 8 ip console 5550 v 4.2 not working???

 

[kwbMitel]

this mean in 3300 ver 8 ip console 5550 v 4.2 not working???

You be the judge, see below

[pre]
3.3.1.7 rel [highlight #FCE94F]8.0.9.20[/highlight][highlight #FCE94F][/highlight] <--- This is your system software level (circa 2008)
3.4.1.7 rel 9.0.0.41
3.5.1.6 rel 9.0.2.18
3.6.1.7 MCD 4.0 rel 10
3.7.0.2 MCD 4.1 rel 10.1
4.0.0.17 MCD 4.1 SP1 rel 10.1.1
4.0.1.7 MCD 4.2 rel 10.2
4.1.0.18 MCD 5.0 rel 11
4.2.0.28 MCD 5.0 SPx rel 11.1
4.2.1.9 MCD 6.0 rel 12
[highlight #FCE94F]4.2.2.3[/highlight] MCD 6.0 SPx rel 12.1 <--- This is the console software you are attempting to use (circa 2014)[/pre]

**********************************************
What's most important is that you realise ... There is no spoon.

 

[LoopyLou]

Console software should be matched as close as possible to the MCD load.

You can't duct tape stupid.

 

[inlsp05]

hi
i install 5550 ip console v4.2.2.3 with3300 icp active software version 8.0.9.20 and work properly !!! just for info ...

 

[kwbMitel]

Properly" is subject to interpretation.

I know there are things that aren't working, you just haven't noticed or don't care.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[inlsp05]

hi
may be.... but same feature with v 3 working and this is important for me