5505 and VLANS

[br0ck]

Hi,

ok i have finally moved from the good ol' PIX over the ASA's WoHo!


ok i have been slated with a task i have never done before i need to setup an ASA 5505 with 2 Cisco 1100 APs.

I need to do one SSID for the LAN for internal use and one SSID for the DMZ for public access

i have been reading that on the 1100's AP's i can assign SSIDs to VLANS now not being a VLAN on Cisco Expert i think i need to do VLAN Trunking on the ASA Correct?

And from what i see this is only supported with a license upgrade to the security bundle?

can some one shed some light on this for me

Thanks in advance!