5428-2-K9 with ISCSI initator

[sreid]

Any one else using this router with the W2K3 and Microsoft ISCSI drivers? I've looked and found very little but I can't be the only one.

I'm having the following problem. I'm using ver 1.05a of the MS ISCSI initiator driver and have setup a Windows 2003 server as a scsirouter.

When I add the 5428 as a target in the intiator in Control panel it accepts it but no available targets show up.

I've set the LUN up correctly or so I think (I've got W2K servers connecting OK with the Cisco driver). When I do a refresh of the Ac=vailable targets on the W2K3 server I get the following on the router

W2K3 server is called meds000001 IP 172.16.121.21
IP for the configured interface on the router is 172.16.121.3


[med-drr-02]# Oct 13 15:11:47: %ISCSI-SERVER-5-SCAC: Adding connection 172.16.121.21:2464<->172.16.121.3:3260 [cfa83d0] to SR 'MEDS000001'
Oct 13 15:11:47: %ISCSI-SERVER-5-SCLROCC: Logout rcvd on conn 172.16.121.21:2464 <->172.16.121.3:3260 for session 1
Oct 13 15:11:47: %ISCSI-SERVER-5-SCRC: Removing connection 172.16.121.21:2464<-> 172.16.121.3:3260 [cfa83d0/d020380(1,0)] from SR 'MEDS000001' (25)
Oct 13 15:11:47: %ISCSI-SERVER-5-SDST: Removing session [d020380/1/400001370000:iqn.1991-05.com.microsoft:meds000001.as.munichre.com<->Discovery] from SR 'MEDS000001'