Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

5412zl hardware module removed but ports still showing...

Status
Not open for further replies.

VinceWhirlwind

Technical User
Dec 4, 2004
1,496
0
0
AU
How do I "unprovision" ports from a switch that no longer has them?

I had a module in Slot "E", but then removed it.

When I do "show int" or "show vlan 1", all the ports from the removed module still appear.

I was guessing there should be some kind of command under "chassis" for provisioning/unprovisioning modules, but I seem to be on the wrong track.

Anybody know how to do this?
 
Restarting the chassis will resolve the issue, as will inserting a different card into the empty slot... I don't know of any other way.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top