Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

515 out-of-band management

Status
Not open for further replies.
ATCal

ATCal

MIS
Apr 1, 2000
308
US
Can I connect a modem to the console port of my Pix 515 for out-of-band management purposes? If so, I can't find the commands/settings.

Thanks

Al


 
Sort by date Sort by votes
No. I can't find any documentation on this anywhere. I can find it for routers and switches, but nothing on the PIX.

Al


 
Upvote 0 Downvote
What kind of Modem is it? It is the same setting as a router or switch when connecting to the console port.

Bits per second to 9600.

Data bits to 8.

Parity to None.

Stop bits to 1.

Flow control to Hardware.
 
Upvote 0 Downvote
But how about the settings on the PIX to answer the request?

Al


 
Upvote 0 Downvote
The pix doesnt need any settings for OOB. The settings I gave you should suffice for the OOB Modem.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

2
  • Locked
  • Question
Loss of my privacy
Replies
12
Views
2K
Rick998
Rick998
Sparrow4
  • Locked
  • Question
Configure Avaya IPO R11 / VM Pro + Office365 or Exchange for voicemail to email
Replies
2
Views
799
Johnkite
Johnkite
Shmid
  • Locked
  • Question
Hi We´re thinking of enabling Ac
Replies
0
Views
542
Shmid
Shmid
Tommy_T
  • Locked
  • Question
Sonic wall - Have an issue remotely connectioning VNC and SMB (and AFP) to one of the 2 ISP circuits
Replies
1
Views
750
nnaarrnn
nnaarrnn
AllenH12
  • Locked
  • Question
Bandwidth in Cisco ASA 5505
Replies
2
Views
445
AllenH12
AllenH12

Part and Inventory Search

Sponsor

Back
Top