4d04h: %AAL5-3-INTERNAL_ERROR

[nicp01]

Hi
I would be grateful if anyone also experiences/d this error on a 6509...and would give me some guidelines as to where its coming from...

4d04h: %AAL5-3-INTERNAL_ERROR: AAL5 doesn't handle such large pkts aal5 data of len 1632, vpi=0, vci=35:

many thks
peter

 

[dibbkd]

Hi, I know this doesn't seem like much help, but when searching the Cisco site, it says "Recommended Action If this message occurs, contact your technical support representative for assistance."

Soooo... call Cisco support, unless someone else here knows the answer.

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a008007cdf8.html

 

[nicp01]

Yes, yore right, reported and Cisco don't know whether its a hardware or software fault...Ive supplied various figures to them, still no joy...no joy either with 6509 ver 12.01 cli command structure...why sh mmc ports dont work or sh switch fabric...wrong version probably...still it passses the time and I sure know a heck of lot more than I did 2 weeks ago..
thks
peter