Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
406v2 memory upgrades?
- Thread starter yipster
- Start date
intrigrant
Systems Engineer
What do you mean with "what is the status"?
If you have a 406V2 with PCS 7 or lower then you need to use the intermediate software 3_1_999 for reformatting the NVRAM in the IP Office otherwise the new bins will not fit and sooner or later you may have a configuration wich is corrupt.
If you have a 406V2 with PCS 7 or lower then you need to use the intermediate software 3_1_999 for reformatting the NVRAM in the IP Office otherwise the new bins will not fit and sooner or later you may have a configuration wich is corrupt.
NuggiFirst
Programmer
Maybe it's the future upgrade to 4.x he's worried about.
Sadly, 4.x is a no go for pre PCS06 V2's, and some PCS07's
Funny thing though: All the PCS07's I've seen has been 64MB versions.
Sadly, 4.x is a no go for pre PCS06 V2's, and some PCS07's
Funny thing though: All the PCS07's I've seen has been 64MB versions.
- Thread starter
- #4
kwing112000
Vendor
Avaya isnt going to do it for free. They never do.
- Status
Similar threads
- Locked
- Solved
- Locked
- Question