403 defaults on reboot

[photon33]

403 unit was running 3.1.65 upgraded directly to 3.2.59 and then to 3.2.65 to solve a hunt group problem with 3.2.59.

Now if you reboot the 403 it will default to factory and the config needs to be reloaded. Any ideas?





------------------------------------------
Wash, rinse, repeat.

 

[tlpeter]

You need to upgrade to 3.2.999 first
Then go to 3.2.65

ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[photon33]

Thanks for the response 3.2.999 is for V2 expansion modules and 3.1.999 is for ip406.

There are no loaders for ip403 in the bins folder on the 3.2 cd except 1.99 and 2.99 which have already been applied before 3.1 was installed.





------------------------------------------
Wash, rinse, repeat.

 

[tlpeter]

You are right
It is a while ago i touched a 403


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Implement IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[photon33]

Oh well I see Q4 3.2.67 is out, I guess I'll try that....





------------------------------------------
Wash, rinse, repeat.