1HWNGAMBLER
Technical User
Does anybody have a for 4.2 symposium working on 4.5 software. The reason I ask is because I will upgrading the switch but the upgrade for CCMS will come later. Please let know if thier will be any issue thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
4.2 Symosium
- Thread starter 1HWNGAMBLER
- Start date
- Status
Yes, or rather we did until 2 weeks ago when we finally upgraded. It was running on 4.5 for almost 6 month before the upgrade.
Of course, if you run into any problem with the SCCS, you're pretty much out of luck as far as support goes from nortel and depending on who your vendor is...same story there as well.
Of course, if you run into any problem with the SCCS, you're pretty much out of luck as far as support goes from nortel and depending on who your vendor is...same story there as well.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question