Nov 28, 2006 1 #1 fmielbye MIS Joined Aug 22, 2001 Messages 63 Location US Can't find where to add the module on the TN. The 2616 you change to AO1 but that option is not on the 3904. Can someone guide me through this? very much appreciated. Fred
Can't find where to add the module on the TN. The 2616 you change to AO1 but that option is not on the 3904. Can someone guide me through this? very much appreciated. Fred
Nov 28, 2006 1 #2 tnjwinters Programmer Joined Jun 15, 2005 Messages 390 Location US On a 3904 in LD 11 at item prompt enter KBA 1 for Key-Based or DBA 1 for Display-Based Accessory. Upvote 0 Downvote
Nov 28, 2006 #3 phones1 Technical User Joined Jun 13, 2005 Messages 706 Location GB Yep beat me to it Remember if it doesn't work hit it harder Scott UK Upvote 0 Downvote
Nov 28, 2006 Thread starter #4 fmielbye MIS Joined Aug 22, 2001 Messages 63 Location US thanks guys. i found it in the ntp's right after I submitted the question. Thanks again Upvote 0 Downvote
Nov 28, 2006 #5 jamie2 Programmer Joined Jul 26, 2005 Messages 1,127 Location US The keys are 32-53 starting on the left side (bottom) going up back down to the right side (bottom) going up on a KBA module. Upvote 0 Downvote
The keys are 32-53 starting on the left side (bottom) going up back down to the right side (bottom) going up on a KBA module.
Nov 28, 2006 #6 chippowell Technical User Joined Jul 13, 2006 Messages 191 Location US And for DBAs: Front screen: 32-39, bottom to top. Second screen: 40-47, bottom to top. Third screen: 48-55, bottom to top. Upvote 0 Downvote
And for DBAs: Front screen: 32-39, bottom to top. Second screen: 40-47, bottom to top. Third screen: 48-55, bottom to top.