3660 to PBX for interoffice VoIP

[xenolith]

I have a customer that uses VIC-2FXS cards throughout his network for interoffice VoIP calls. These just serve lines into his phone systems at all the offices and seems to work well for him. Now, he wishes to add more capacity to the main office and is asking about T1 capabilities to the phone system. Would a NM-HDV-1T1-24 (with VWIC-1MFT-T1) likely give me this capability?

From glancing over the configuration documentation for IOS 12.0,

http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087b28.html

, it appears it would.

Does anyone have any advice on this setup?

 

[tech1994]

You might want to look at this as well.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a0080091b9c.html

DSP's may be something to consider.

----------------------

http://www.ciscohq.com

 

[jpm121]

xenolith, the short answer is yes, that's what the VWIC module is for. Of course check compatibilities and make sure your ducks are in a row, and don't discount the above post by tech1994.