3616 Wireless IP Telephone

[4merlucent]

Iam trying to set up a 3616 wireless ip- handset
I can set the ip-address, subnet mask and default gateway, but I cant see any options for setting the tftp ip, call-server ip, call server port and vpp ip anywere in the admin menu
Anyone out there set these up before

Thanks in advance

 

[stlouis1]

The menus are little difficult to follow, but if you changed the IP address you should be able to set the other parameters that you want too. You entered the programming mode by holding down two buttons and then choose 'static' for the IP addressing instead of 'DHCP'. This opened a menu that included the IP address that you changed. The subnet mask, TFTP server, call server, etc. addresses are all on the same directory level.

 

[mrjedi]

If you don't have the menus, you have loaded a wrong firmware for the phone. On the spectralink website, the same phone can be used for cisco avaya and other brands but each has its own fiemware type.