3560G/Vlan/4507/not working

[mccullrr]

OK. I've got a 3560G that I have set up with a vlan. It will be connected to a Catalyst 4507 via fiber. I have both switches configured and am in the testing mode now, but when I plug a computer into the 3560G, I do not get a good network connection. I have set up a vlan on the 3560. I will post my configs below and would appreciate any help anyone can give me!

Thanks,
Becky

3560G:
sh run
Building configuration...

Current configuration : 6070 bytes
!
! Last configuration change at 11:34:19 EST Fri Jul 14 2006 by admin
! NVRAM config last updated at 15:48:38 EST Wed Jul 12 2006 by admin
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname CISCO65035
!
enable secret 5 $1$b2ML$R2VWGA34dP.aDPMLPy6Gc/
!
username admin password 0 SC0TTY
aaa new-model
aaa authentication login default local
!
aaa session-id common
clock timezone EST -5
vtp domain WLSC
vtp mode transparent
ip subnet-zero
no ip domain-lookup
!
!
!
!
no file verify auto
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
vlan 200
name Media_Arts_Center
!
!
interface FastEthernet0/1
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/2
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/3
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/4
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/5
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/6
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/7
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/8
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/9
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/10
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/11
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/12
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/13
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/14
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/15
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/16
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/17
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/18
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/19
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/20
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/21
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/22
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/23
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/24
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/25
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/26
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/27
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/28
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/29
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/30
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/31
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/32
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/33
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/34
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/35
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/36
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/37
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/38
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/39
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/40
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/41
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/42
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/43
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/44
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/45
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/46
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/47
switchport access vlan 200
switchport mode access
no cdp enable
!
interface FastEthernet0/48
switchport access vlan 200
switchport mode access
no cdp enable
!
interface GigabitEthernet0/1
switchport access vlan 200
switchport mode access
no cdp enable
!
interface GigabitEthernet0/2
switchport access vlan 200
switchport mode access
no cdp enable
!
interface GigabitEthernet0/3
switchport access vlan 200
switchport mode access
no cdp enable
!
interface GigabitEthernet0/4
switchport access vlan 200
switchport mode access
no cdp enable
!
interface Vlan1
ip address 129.71.65.35 255.255.255.0
!
interface Vlan200
description Media Arts Center
no ip address
ip helper-address 10.1.255.251
no ip redirects
no ip unreachables
!
ip classless
ip http server
!
!
no cdp run
radius-server source-ports 1645-1646
!
control-plane
!
!
line con 0
line vty 0 4
password SC0TTY
line vty 5 15
password SC0TTY
!
!
end

CISCO65035#

Catalyst 4507:

vlan 200
name Media_Arts_Center

!
interface GigabitEthernet6/1
description Connection from 4507 to Media Arts Center
switchport access vlan 200
rmon collection stats 66 owner root@ciscoworks

interface Vlan200
description Media Arts Center
ip address 10.1.253.1 255.255.255.0
ip access-group block in
ip access-group block out
no ip redirects
ip policy route-map students

 

[voltron1011]

What do you mean you don't get a good network connection. Do you mean internet access? Where is the gateway router at? Is the 4507's ports in the same vlan? If so, I don't see anything in your config for a trunk. You'll need that in order for the vlans to cross over machines.

 

[mccullrr]

There is no network connectivity at all. No internet. I pull a bad ip address from dhcp. So, anyways. I addedd the following and still no luck....

4507:
interface GigabitEthernet6/1
description Connection from 4507 to Media Arts Center
switchport access vlan 200
switchport trunk native vlan 200
rmon collection stats 66 owner root@ciscoworks

3560G:
interface GigabitEthernet0/1
switchport access vlan 200
switchport mode access
switchport trunk native vlan 200
switchport trunk encapsulation dot1q

A showing of interfaces tells me that vlan1 is up, protocol is down. vlan200 is up, protocol is up.

Thanks!
Becky

 

[vipergg]

not sure what you are doing on the 3560 and why you have an address on Vlan 1 . Where are you doing the routing ? Is the 4507 doing the routing and the 3560 just being used as a layer 2 access switch ? If so then if you plan on using vlan 1 as your management vlan then you will have to trunk the connection to the 3560 and 4507 . If the 4507 is doing the routing you do not even need a layer SVI for vlan 200 . I also see no default route statement for . Maybe you can elaborate more on your setup . On your connecting links set it up as follows. This will trunk your link. Your ip helper address needs to be on the 4506 side under the vlan 200 interface otherwise you won't pull an address.

switchport access vlan 200
switchport trunk encapsulation dot1q
switchport trunk native vlan 200
switchport trunk allowed vlan 1,200
switchport mode dynamic desirable

 

[mccullrr]

Thanks for everyones comments. I did get it to work with the vlan200, but now things have changed and we are just going to use it on the flat network now until we can get a good design for the whole network. So now I have more questions. I have removed all instances of vlan200 on the 3560g and the 4507. As you can tell, I am a new network admin, still going through my ccna classes. I need help in configuring my gigabit 6/1 interface so that it will connect to the flat network. Can anyone help out here???

Thanks,
Becky