Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
3550 and IPX 1
- Thread starter brad182
- Start date
-
1
- #2
No. The 3550 is designed to route IP only, there are no plans for an IOS release with IPX routing. IPX can be supported using the 'fallback bridging' feature detailed on CCO.
Why not take the opportunity to rid your network of IPX....... IP has been natively supported by Netware since Version 4.0, and we are now on Version 6.0 (about 4 years on....). Even Netware 3.x can be made to work quite easily with IP. Make the effort now and you will thank yourself later.
Andy
Why not take the opportunity to rid your network of IPX....... IP has been natively supported by Netware since Version 4.0, and we are now on Version 6.0 (about 4 years on....). Even Netware 3.x can be made to work quite easily with IP. Make the effort now and you will thank yourself later.
Andy
- Status
Similar threads
- Locked
- Question
- Locked
- Question