Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
308 Dr 1
- Thread starter telllman
- Start date
misseditbythatmuch
Technical User
On the 308, I believe you needed DR 5.x software for caller ID. The CII hardware was internal (did not need C6/M8 box like the 616 or 824). I will double check my doc file, but I am pretty sure the DR1 did not support caller ID.
- Thread starter
- #3
curlycord
Programmer
Ok but dont yell.
DR 5 and 5.1 allow caller ID
No module needed.
One set will get Auto info, the rest will need to use F811 to see the ID.
=----(((((((((()----=
curlycord
DR 5 and 5.1 allow caller ID
No module needed.
One set will get Auto info, the rest will need to use F811 to see the ID.
=----(((((((((()----=
curlycord
curlycord
Programmer
To be more clear anything below DR5 does not permit Caller ID.
=----(((((((((()----=
curlycord
=----(((((((((()----=
curlycord
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question