Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

300E/9006i 6.5 to Cisco CM 4.2...No Name passed...QSIG??

Status
Not open for further replies.
ACATR

ACATR

IS-IT--Management
Joined
Nov 9, 2007
Messages
2
Location
US
Anbody have any suggestions as to how to do this?

What does it take to turn up QSIG on the 9006i 6.5 (hicom 330E)?
 
Sort by date Sort by votes
Have you checked the FEAT AMO to see if QSIG is in the 6.5?
If not, you'll have to get Siemens to load it (for a price of course!)
 
Upvote 0 Downvote
Correction on the AMO: In the 9006, go into EMML and use the AMO FEATPUR to see if QSIG is in it..
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Omenas
  • Locked
  • Question Question
OS4K V10R1. DeskPhone CP600 HFA function key name
Replies
2
Views
395
member 1453342
M
Eldar Huseynov
  • Locked
  • Question Question
HiPath4000 how to change the disconnect timer for no answer
Replies
7
Views
690
Eldar Huseynov
Eldar Huseynov
wabe-hk
  • Locked
  • Question Question
How to assign different internal numbers to dial 0 to call acwinIP MQ to different F keys to queue for answering
Replies
1
Views
425
sbcsu
sbcsu
3
  • Locked
  • Question Question
Hi am trying to call office in different Pabx hipath 4000 and its response back on screen Do not disturb
Replies
6
Views
615
sbcsu
sbcsu
LAAZ
  • Locked
  • Question Question
Hipath 4K V5.0 Name display issue in network calls
Replies
1
Views
396
thepfy
thepfy

Part and Inventory Search

Sponsor

Back
Top