Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

3005 VPN Concentrator Port 443, SSL, TCP

Status
Not open for further replies.
Jun 1, 2002
217
US
Wanting to upgrade my concentrator to use the new HTTPS (HTTP over SSL). Currently we have a majority of our clients using IPSEC over TCP port 443 or 10000. Mostly 443 due to some quirky connection methods and areas.

I see in chap 15 that changing the HTTPS port from 443 to something else is possible... Has anyone run across any issues? Do you think that upgrading 3.6.7 to 4.1 will mess up the current tunneling proto configuration?

No test concentrator and very demanding users leave little room for error.

Thanks,
 
The upgrade shouldn't mess your current configuration I have done it a couple of times last week and I didn't encounter any problems. If you enable NAT-T (Nat Traversal) on the concentrator then you can forget about IPSec over TCP since the clients will negotiate NAT-T during tunnel establishment and use IPSec over UDP 4500, then you would'n need to modify https on a different port...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top