3 to 5 digits

[ducalcity]

Hello to all.

In my office one is going away to change of the 3 to 5 digits extensions, in addition, the operator will happen to be the 7 to be the 9.

Which is the best form to do it?

Thanks

 

[ducalcity]

EXTENSION NUMBER SERIES 300 - 398
400 - 499
801 - 992
994 - 999
EXTERNAL DESTINATION CODE 00 - 05
0600 - 0699
07 - 10
2
OPERATOR INDIV. NUMBER SERIES 399
OPERATOR COMMON NUMBER SERIES 7

 

[summerdike]

Can you state in clear language what the problem is?


______________________________
"Reload and Restart Requested
System Initiated"

 

[ducalcity]

I want to change the internals extensions XXX to 70XXX, the
operator common number serie 7 to 9 and the operator individual number serie 399 to 70399

 

[rfpui]

Hi raulbal
How big is Your system?
Send printout of command SYECP
If it is big system, changing the extensions numbers is a hard work.
I see that now You can have ca. 400 extensions

To change numbers you need PC-regen Excel and many time.


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[summerdike]

;delete common operater access code:
opcoe:coacc=7;
nanse:numtyp=oc,numse=7;
y;

;delete individual operator:
opere:dir=399;
y;
nanse:numtyp=oi,numse=399;
y;

;Initiate 70xxx excluding 70399 as extension number series.
nansi:numtyp=ex,numse=70000&&70398&70400&&70999;

;Initiate 70399 as new operator number nansi:numtyp=oi,numse=70399;
;only necessary parameters are stated in this example)
operi:dir=70399,equ=,prg=,traf=,type=;

;Change all extension numbers:
; this can be a lot of work depending on the amount
; of extensions.....so for a big site
; I would make a pcregen ini file
; where I'd use a text editor to
; put 70 in front of the existing numbers
KSDNCIROLD,DIR=;
EXDNCIROLD=,DIR=;

;Delete the old now unused extension number series:
nanse:numtyp=ex,numse=300-398;
nanse:numtyp=ex,numse=400-499;
nanse:numtyp=ex,numse=800-992;
nanse:numtyp=ex,numse=994-999;

;Initiate the common operator number:
nansi:numtyp=oc,numse=9;
opcoi:coacc=9;

Now also mind NUTRI as the incoming number on DID lines has changed.
But for now I think you 'll have enough work already!








______________________________
"Reload and Restart Requested
System Initiated"

 

[rfpui]

Hi summerdike
Command
KSDNCIROLD,DIR=;
EXDNCIROLD=,DIR=;
are not recommended, very oft this command is blocked or erased from system.
After this command data corruption is guaranty
I never use this commands
What happened ( after xxDNC command ) with groups (GH GP etc) or RODNx DAY= NIGHT=’?
In CDINx DIV will be changed too?


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[ceejay55]

There is only 1 way to do it and that is rebuild from scratch(INL)
Then it is only simple editing
Craig

 

[ducalcity]

For RFPUI user:

<SYECP:LIM=1;SYSTEM EQUIPMENT CONFIGURATION
INITIATED LINE INDIVIDUALS IN LIM 1
INTERNAL LINES: ANALOGUE 288
DIGITAL 28
CAS
POTS
ITS
OPERATOR 1
DATA
DUAL
PUBLIC LINES: ANALOGUE 8
DIGITAL
ISDN S0
ISDN S2M 60
H.323
PRIVATE LINES: ANALOGUE
DIGITAL
APNSS
DPNSS
ISDN S0 7
ISDN S2M
H.323
END
<

 

[ducalcity]

Thanks to all

A question for ceejay55,

I connect with the Md by Ethernet,

I can copy the configuration of the MD-110 to my hard disk for editing?

Thanks

 

[rfpui]

No, copy for editing is not posible.
Only for backup. Using ftp You can transfer last REL (REL1 or REL2)to PC hard disk.

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[kings1]

Raulbal,

Bestway is to run pcregen, start md110 from INL and configure the 5 digits into the system.

Which country are you from and which BCx release?

Kings.

 

[singhbrindisi]

Dear All,

I don't think its advisable for Pcregen- INL keeping in mind the level of expertise raulbal has...

Summerdike has given all the commands in sequence which are good enough for him to do the changes for the time being...In case of KSDNc errors he can fix it by
KSEQC: New vacant position & back
KSEQC:Old position...

It will not disturb any other traffic only the problematic extension will be handled out...

Raulbal: Once you are confident making up a LIM from scratch then you can think about INL procedure...

Cheers,

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[rfpui]

Hi raulbal

I change my mind about copy configuration MD data for editing.
You MUST use PC-regen to collect and store configuration in human language.
But I see a big problem (maybe I’m wrong) you have old version of SAM (probably 3.6) and BC 12 or higher (12.1) in consequence not correct version of PC-regen.
My investigation

You send a printout of command SYECP and
1
in this printout public and private line have position H.323. This option is available from BC 12
2
<SYECP:LIM=1;SYSTEM EQUIPMENT CONFIGURATION
Command and answer in this some line. It was a problem with WinFiol from SAM 3.6 and BC 10 (or higher) with NIU and connection via Ethernet.


And now is my test after this test I always thing that command xxDNC is wrong and data corruption is guaranty
I crate two extensions KS 2012 and EX 2046
Than make diversions and GP group and after change number using command xxDNC
[tt]
<KSEXIIR=2012,CAT=21,EQU=1-0-22-04,ITYPE=26;
EXECUTED

<EXTEIIR=2046,CAT=21,TYPE=EL6,EQU=1-0-62-15;
EXECUTED

<CDINIIR=2012,DIV=2046;
EXECUTED

<CDINIIR=2046,DIV=2012;
EXECUTED

<GPGRI:GRP=2012,LIM=1;
EXECUTED

<GPGMI:GRP=2012,DIR=2012&2046;
EXECUTED

<sudip:dir=2012&2046;
DIRECTORY INFORMATION AT 22:00:55 31JUL05
DIRECTORY NUMBER : 2012
TYPE OF DIRECTORY NUMBER : DTS
NAME :

EXTENSION TERMINAL DATA
EQU TERMD ADN CALALT TIMER
1-0-22-04 0026 1 0

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG BSEC MCOST
21 01000014 0002120700 110151000 000001 0 00000000000000 F 0 -

DIGITAL EXTENSION FUNCTION KEY DATA
KEY KTYPE FCN VALUE DIG
00 PGM
01 FCN CAB
02 FCN CAD
03 FCN TNS
09 ODN 2012
10 ODN 2012
11 ODN 2012
13 FCN TNS
14 FCN TNS

GROUP DATA
GROUP CALL PICKUP: 2012

DIVERSION DATA
INDIVIDUAL DIVERSION NUMBER: 2046

PAGING DATA

======================================================================
DIRECTORY NUMBER : 2046
TYPE OF DIRECTORY NUMBER : ATS
NAME :

EXTENSION TERMINAL DATA
EQU TERMD ADN
1-0-62-15 0000

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG BSEC MCOST
21 01000014 0002120700 110151000 000001 0 000000000 - 0 -

GROUP DATA
GROUP CALL PICKUP: 2012

DIVERSION DATA
INDIVIDUAL DIVERSION NUMBER: 2012

PAGING DATA

END
now all is OK
Numbers changes
<ksdnc:dirold=2012,dir=2013;
EXECUTED

<exdnc:dirold=2046,dir=2047;
EXECUTED

<sudip:dir=2012&2046;
NOT ACCEPTED
DIR=2012
DIRECTORY NUMBER(S) NOT ASSIGNED
<sudip:dir=2013&2047;
DIRECTORY INFORMATION AT 22:03:21 31JUL05
DIRECTORY NUMBER : 2013
TYPE OF DIRECTORY NUMBER : DTS
NAME :

EXTENSION TERMINAL DATA
EQU TERMD ADN CALALT TIMER
1-0-22-04 0026 1 0

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG BSEC MCOST
21 01000014 0002120700 110151000 000001 0 00000000000000 F 0 -

DIGITAL EXTENSION FUNCTION KEY DATA
KEY KTYPE FCN VALUE DIG
00 PGM
01 FCN CAB
02 FCN CAD
03 FCN TNS
09 ODN 2013
10 ODN 2013
11 ODN 2013
13 FCN TNS
14 FCN TNS

GROUP DATA
GROUP CALL PICKUP: 2012

DIVERSION DATA
INDIVIDUAL DIVERSION NUMBER: 2046

[blue]Individual diversion number was not changed [/blue]
PAGING DATA

======================================================================
DIRECTORY NUMBER : 2047
TYPE OF DIRECTORY NUMBER : ATS
NAME :

EXTENSION TERMINAL DATA
EQU TERMD ADN
2-2-62-15 0000

EXTENSION DIRECTORY CATEGORIES
CAT TRAF SERV CDIV ROC TRM ADC CUST LANG BSEC MCOST
21 01000014 0002120700 110151000 000001 0 000000000 - 0 -

GROUP DATA
GROUP CALL PICKUP: 2012

DIVERSION DATA
NDIVIDUAL DIVERSION NUMBER: 2012
[blue]Individual diversion number was not changed [/blue]

PAGING DATA

END

<ghdap:grp=2012;
NOT ACCEPTED
GRP
NOT ASSIGNED
<GPGRI:GRP=2012,LIM=2;
NOT ACCEPTED

ALREADY ASSIGNED
<ksdnc:dirold=2013,dir=2012;
EXECUTED

<exdnc:dirold=2047,dir=2046;
EXECUTED

<ghdap:grp=2012;
NOT ACCEPTED
GRP
NOT ASSIGNED
<GPGRE :GRP=2012;
NOT ACCEPTED
MEMBERS STILL INIT
<GPGME :GRP=2012,DIR=all;
EXECUTED

<GPGRE :GRP=2012;
EXECUTED

<ghdap:grp=2012;
NOT ACCEPTED
GRP
NOT ASSIGNED
<KSEXeIR=2012;
KSEXEIR=2012;
SURE? (YES/NO)
<y;
EXECUTED

<EXTEEIR=2046;
EXTEEIR=2046;
SURE? (YES/NO)
<Y;
EXECUTED
[/tt]
<


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[summerdike]

RFPUI,

Regarding your test changing numbers with EXDNC and KSDNC:

All I see in the printouts is that after the number changes the diverison data are gone. This to me sounds like a minor problem, if it is a problem at all.

I assume you tried to print out the call pick up group data with the command GHDAP but that is the Group Hunting Data Printout .
For Call Pick Up data the command GPDAP applies.
MD110 shows in the printout SUDIP that number change is followed correctly by Group Call Pick up.



______________________________
&quot;Reload and Restart Requested
System Initiated&quot;

 

[ducalcity]

Another question:

For the change I need to block cards?

Thanks

 

[summerdike]

When you do the operation while you expect traffic it is wise to block cards (maybe even block whole Lims with BLLTE), but it is not necessary.

If you use the commands I posted earlier it is advisable to do the change in a weekend or on a time with no or very very low traffic.



______________________________
&quot;Reload and Restart Requested
System Initiated&quot;

 

[ducalcity]

A last question????

How I can make a Backup of the information of the MD-110?

Thanks.

 

[summerdike]

Engineering the Md110 requires a group of programs called SAM toolbox.
One program in there is called PCregen (from PC regeneration).
It can make a back up off all the Exchange data in the MD110.

A complete backup (including program units) is available on the HDU or NIU2. It is called REL1 directory.
You can make a copy of this backup with the means of a an FTP client program (like Win commander or another).
This operation requires NIU/NIU2 (the FTP server part).
In the ftp client program connect by ip address to the MD110 (requires username password of a certain level, mostly level 5).
Path on HDU to Rel1 is //usr1/ses/dr/Rel1



______________________________
&quot;Reload and Restart Requested
System Initiated&quot;

 

[ducalcity]

I have a problem with the FTP client:

COMMAND:> LIST
STATUS:> Connecting FTP data socket 172.24.177.231:2565...
150 Opening data connection for (Opening data connection for (Opening data co) (172.24.177.231,2565).
226 Closing data connection.
STATUS:> Getting listing "/ USR1"...
COMMAND:> TYPE A
200 Command okay.
COMMAND:> CWD / USR1
521 "/ USR1" is not a directory
ERROR:> Permanent completion problem reply.