3.1(56) & IPO 403

[deltaserver403]

Dear All.

We have 1site with IPO 403 2.1(27), we are planning for upgrade to 3.1(56) for conecting IP DECT & new 5410 series phones.

when i checked the doc i never found upgrading 403, only it says 406V1 & 406V2.

it is not possible to upgrade 403 to 3.1(56) or do we need change the IPO

Thanks
DS

 

[d14v0l0]

Yes, I upgrade my ip403.

 

[intrigrant]

First upgrade to 3.0 if you want to keep customer data valid.
Read the corresponding upgrade manuals as you may upgrade the bootloader as well with a special firmware, this will be in the docs.

 

[h382]

For a 403, you just need to upgrade it to 2.99 first, and then you can go right to 3.1(56). Upgrading it to 2.99 expands the memory enough to handle 3.1

On a 406v1/v2 however, you never had to upgrade it to 2.99 because the memory was large enough to handle 3.0, but to handle 3.1 they need do need to be upgraded to 3.99 first to expand the memory.

 

[jml2665]

don't forget the new June2006 release 3.1.65 was just released and available for download on the avaya support site