Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
2nd MCI Link
- Thread starter grh959
- Start date
No known problems on an fusion network that I know of. Is this going to be for an additional interactive software or is it going to be reading only?
the reason I ask is you can build a black box that will split the DB25 output to 2 locations and would save on I/O expansion as well as programming. This works as long as 1 of the ports is receive only, and not 2 send and receive I/O ports.
There is a box that NEC Australia sells called an IAC Black Box that does exactly that.
Regards,
Dr VuDu
the reason I ask is you can build a black box that will split the DB25 output to 2 locations and would save on I/O expansion as well as programming. This works as long as 1 of the ports is receive only, and not 2 send and receive I/O ports.
There is a box that NEC Australia sells called an IAC Black Box that does exactly that.
Regards,
Dr VuDu
- Status
Similar threads
- Locked
- Question