2950 cissco switch

[Delboy16]

I have a 2950 switch which I am unable program. I bourght it second hand so I have no logon credentials. I need to create 2 vanlans. Can I have some advice on how to default this unit and avvise on how to reconfigure, Thanks

 

[tcvander]

Here is a password recovery procedure to reset the password, this will allow you to get into the unit:

http://www.cisco.com/warp/public/474/pswdrec_2900xl.html

And as far as configuring VLAN's try here:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/scg/scg_vlan.htm#xtocid224830

Todd VanDerwerken, CCNA, CCDA
Technical Consultant

http://www.ciscolinks.net

 

[tschafer]

Hi to All,
I'm having a problem manageing a 3524 via the brower interface. The problem is the switch keeps asking for a Username and password. A password was set on the switch put no username was never entered.I've tried no username and the password, I only get the error:
"Authorization Required
Browser not authentication-capable or authentication failed"
I can't seem to find anything on Cisco's web site.
Thanks,
Ted