2600 Serial bandwidth

[syndicate47]

Hello

I have two 2600's setup back to back for some bandwidth testing. Can someone help me out on how to change the bandwidth between the 2 routers to simulate different WAN link speeds ( eg, 1.54MB, 1.024MB, 1.98MB etc )

Thanks

 

[GOMA975]

add the interface command < clock rate > to put the vlue you need
eg. 1500 bit/sec in one of the two interfaces and this intertface will be the DCE.

mohammed gomma
ccna,remote-access,swithing,
cisco feild engineer

 

[GOMA975]

add the interface command < clock rate > to put the vlue you need
eg. 1500 bit/sec in one of the two interfaces and this intertface will be the DCE.

mohammed gomma
ccna,remote-access,switching,
cisco feild engineer