2600 routing help

[Robroy2003]

I have 2 subnets behind one 2621 router. Serial to point to point to main office, 1 ethernet on my network and the second ethernet to a second office. I would like to setup one of my subnets to go out the serial interface and the other subnet to go out the ethernet interface. My network currently uses all static routes.I have put in ip route 0.0.0.0 0.0.0.0 s0/0 and ip route 0.0.0.0 0.0.0.0 e0/1 but with both routes, it gets pretty choppy. Any help with this?

Thanks

Mark Spencer

 

[plshlpme]

you could make a route map and do source based routing to force the subnets out the interface you want.