Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

2600 routers as Win2k DNS client

Status
Not open for further replies.
OpimusPr1me

OpimusPr1me

Technical User
Joined
Feb 4, 2005
Messages
1
Location
CA
How do I configure my 2600 router / my win2k server DNS so that the Router is capable of name resolution?
 
Sort by date Sort by votes
on the router you can give the ip name server xxx.xxx.xxx.xxx
command. the x should be the ip address of the dns server on your w2k server.

CCNA, CCNP..partly ;)
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

quazimotto
  • Locked
  • Question Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
316
quazimotto
quazimotto
CDIV
  • Locked
  • Question Question
Use uplink port as access port 2960
Replies
9
Views
1K
CDIV
CDIV
detewe
  • Locked
  • Question Question
JTAG pinout on Linksys E4200v2 / EA4500 routers
Replies
0
Views
391
detewe
detewe
ClaireNovice
  • Locked
  • Question Question
Unable to view ASDM real-time logs
Replies
1
Views
511
ADB100
ADB100
steel_bender
  • Locked
  • Question Question
Allow HTTPS TCP Traffic through ASA5525
Replies
1
Views
376
Mogles49
Mogles49

Part and Inventory Search

Sponsor

Back
Top