2600 Router doesn't boot

[egnalc]

I have a 2600 router that doesn't boot. This router is used in a lab environment only. Here is what I get when the router is booted up.

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 8192 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x786e18

Error : memory requirements exceed available memory
Memory required : 0x013F7DF0

*** System received a Software forced crash ***
signal= 0x17, code= 0x4, context= 0x0
PC = 0xbaddaddd, Vector = 0xbaddaddd, SP = 0xbaddaddd

*** Machine Check Exception ***
PC = 0xfff14e30, Vector = 0x200, SP = 0x807ffe40

Any help would be greatly appreciated!

 

[Routerboy]

Looks like you don't have enough memory to load the IOS. Your system has 8MB but it says it requires 20.94 MB (013F7DF0) to boot. It appears as if the bootstrap is loading and then it is running out of memory. Try either changing out the memory or upgrading.

Here is a snapshot of one of my 2600s:

Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)
TAC Support:

http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 21-Jun-02 08:50 by ccai
Image text-base: 0x80008074, data-base: 0x80A2BD40

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

uptime is 27 weeks, 2 days, 12 hours, 21 minutes
System returned to ROM by reload at 00:16:23 EDT Tue Jun 10 2003
System restarted at 07:35:34 EDT Tue Jun 10 2003
System image file is "flash:c2600-i-mz.122-8.T5.bin"

cisco 2610XM (MPC860P) processor (revision 0x100) with 28672K/4096K bytes of memory.
Processor board ID JAD07080WHU (4112372254)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102


RouterBoy!