I'm trying to use my 2514 in my house on a cable modem, I read the topic posted below for a dsl line but it didn't help me any. Right now the set up is:
Modem-----E0 Router E1----- Linksys wireless router/switch
I think part of my problem may be that i'm using a linksys router as a switch, but i did disable dhcp and all routing options, i know it's possible.
I'm pretty sure my problem is somewhere in the wiring, do i need a crossover cable to go from E1 on the router to the linksys wap/switch?
Here is my configuration on my router, i'm pretty sure my DHCP and NAT is configured right:
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
logging rate-limit console 10 except errors
no logging console
enable secret <removed>
enable password <removed>
!
ip subnet-zero
no ip finger
ip dhcp excluded-address 192.168.1.1
!
ip dhcp pool CLIENT
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 69.145.248.4 69.145.232.4
lease 0 2
!
no ip dhcp-client network-discovery
!
!
!
!
interface Ethernet0
ip address dhcp
ip nat outside
no cdp enable
!
interface Ethernet1
ip address 192.168.1.1 255.255.255.0
ip nat inside
no cdp enable
hold-queue 32 in
!
interface Serial0
no ip address
shutdown
no fair-queue
no cdp enable
!
interface Serial1
no ip address
shutdown
no cdp enable
!
router rip
version 2
network 192.168.1.0
no auto-summary
!
ip nat inside source list 102 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1
ip http server
!
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
no cdp run
!
!
line con 0
exec-timeout 120 0
password <removed>
login
transport input none
stopbits 1
line aux 0
password <removed>
login
line vty 0 4
exec-timeout 120 0
password <removed>
login local
length 0
!
end
If anyone has any ideas of what i'm missing or what is wrong in the config let me know. I think my problem is the wiring and how I have the router as a switch, but I know it is possible, maybe a crossover is needed, or if anyone has a tutorial for using it as a switch that would help. Again it's a cablem modem not a dsl line.
Thanks
Modem-----E0 Router E1----- Linksys wireless router/switch
I think part of my problem may be that i'm using a linksys router as a switch, but i did disable dhcp and all routing options, i know it's possible.
I'm pretty sure my problem is somewhere in the wiring, do i need a crossover cable to go from E1 on the router to the linksys wap/switch?
Here is my configuration on my router, i'm pretty sure my DHCP and NAT is configured right:
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
logging rate-limit console 10 except errors
no logging console
enable secret <removed>
enable password <removed>
!
ip subnet-zero
no ip finger
ip dhcp excluded-address 192.168.1.1
!
ip dhcp pool CLIENT
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 69.145.248.4 69.145.232.4
lease 0 2
!
no ip dhcp-client network-discovery
!
!
!
!
interface Ethernet0
ip address dhcp
ip nat outside
no cdp enable
!
interface Ethernet1
ip address 192.168.1.1 255.255.255.0
ip nat inside
no cdp enable
hold-queue 32 in
!
interface Serial0
no ip address
shutdown
no fair-queue
no cdp enable
!
interface Serial1
no ip address
shutdown
no cdp enable
!
router rip
version 2
network 192.168.1.0
no auto-summary
!
ip nat inside source list 102 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet1
ip http server
!
access-list 102 permit ip 192.168.1.0 0.0.0.255 any
no cdp run
!
!
line con 0
exec-timeout 120 0
password <removed>
login
transport input none
stopbits 1
line aux 0
password <removed>
login
line vty 0 4
exec-timeout 120 0
password <removed>
login local
length 0
!
end
If anyone has any ideas of what i'm missing or what is wrong in the config let me know. I think my problem is the wiring and how I have the router as a switch, but I know it is possible, maybe a crossover is needed, or if anyone has a tutorial for using it as a switch that would help. Again it's a cablem modem not a dsl line.
Thanks