tonysprout
Vendor
Costs for CallPilot mailbox upgrade are outrageous. Looking to install an older vmail that uses analog ports.
1. Any way to light message lights / turn them off from a single line port?
2. Can M3904 sets send dtmf to a single line port? (I can check this on-site)
3. Anything else I need to be aware of?
I'm sure the PBX (11C rls 25) will not "dial" into the vmail, but I can work around that.
I can also have the vmail call each set periodically in place of lamps, but this is not optimal way to do it.
Customer has CallPilot that will stay in place for 1st 100 users, so this box will have minimum amount of users.
Thanks!
1. Any way to light message lights / turn them off from a single line port?
2. Can M3904 sets send dtmf to a single line port? (I can check this on-site)
3. Anything else I need to be aware of?
I'm sure the PBX (11C rls 25) will not "dial" into the vmail, but I can work around that.
I can also have the vmail call each set periodically in place of lamps, but this is not optimal way to do it.
Customer has CallPilot that will stay in place for 1st 100 users, so this box will have minimum amount of users.
Thanks!