2 lims gjul4

[snakeblitsen]

Hi, I have a 2 lim system BC9. It has 1 gjul4 - gjul4 link. What is involved to add another link to give 60 channels. Can the gjul4 card be put in any spare slot. To configure is it only CNBOI command.

 

[whosrdaddy]

GJLII:GSMULT=0-4,equ=1-1-00-00;
GJLII:GSMULT=0-5,equ=2-1-00-00;

--------------------------------------
What You See Is What You Get

 

[rfpui]

Hi
Daddy have right but a little comment
GJUL board should be placed on 00 time slot (0-00, 1-00, 2-00, 3-00) and before GJLII command CNHUI must be send.

 

[PCLOP]

why only 00 time slot?
Any 32 time slot will do.

 

[snakeblitsen]

Hi, Thanks everybody. I've checked 'Alex, and it insinuates that the GJULs can be in any position so long as both Lims are the same eg 1-0-72 and 2-0-72 (which I hope to use as the REU boards are coming out when the new power supplies are installed.) Is this correct??
Cheers

 

[whosrdaddy]

snake, correct but, you must have 32 timeslots, so only x-x-y0 slots will do...

--------------------------------------
What You See Is What You Get