My company just moved into a new building, where a T1 line is shared between multiple companies. Now, the people who administer that network had given me 5 IP Addresses for me to use in my internal network.
1. IP 216.39.X.X
Mask 255.255.255.0
Gateway 216.39.X.X
DNS 216.73.X.2
216.53.X.3
The rest of the IP's:
216.73.X.234/235/236/251
Mask 255.255.255.224
Gateway 216.73.X.X
DNS Same as 1st IP.
Main Floor T1--My Router 1751--Firewall506E
|
|
LAN
Right now, the LAN is setup to use 192.168.0.X.
I am really confuse how to go about assigning IP's to my router and firewall. Can someone help me with this configuration or point me in the right direction. If possible a basic configuration of Router and PIX.
My router has two NIC's, one is an ethernet card connected to main Floor Network and the other card (fastethernet) going to my PIX506E.
Any help would be greatly appreciated.
1. IP 216.39.X.X
Mask 255.255.255.0
Gateway 216.39.X.X
DNS 216.73.X.2
216.53.X.3
The rest of the IP's:
216.73.X.234/235/236/251
Mask 255.255.255.224
Gateway 216.73.X.X
DNS Same as 1st IP.
Main Floor T1--My Router 1751--Firewall506E
|
|
LAN
Right now, the LAN is setup to use 192.168.0.X.
I am really confuse how to go about assigning IP's to my router and firewall. Can someone help me with this configuration or point me in the right direction. If possible a basic configuration of Router and PIX.
My router has two NIC's, one is an ethernet card connected to main Floor Network and the other card (fastethernet) going to my PIX506E.
Any help would be greatly appreciated.