Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    So what are options in this? Need memory, harddrive, OS2, upgrade key from 2.2 to 3.1, the upgrade software by Nortel, Back-Pack CDROM, knowledge of WTFTDWI, then it maybe possible to set the COS to zero for expiring passwords? Will the Control Unit be compatible with the upgrade? Thank you...
  2. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    exsmogger The version Norstar VM 2.2. Thank you Ed Hayes
  3. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    Au I did, that is why the guys came out to look at the phone system. "I had another company come out and look at our phone setup, and one of the engineers looked it over and said that because this is an early unit and the switch that the phone system uses, we can not update to a newer...
  4. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    exsmogger Before we upgraded to this new NAM we had no time limits on our passwords. With our system before the upgrade what device determined the passwords time limit and what device stored the mailbox information? Would this system always need a NAM in order function? What did we have...
  5. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    Looking at the NAM I noticed that there is only two screws holding the cover on. If I remove these two screws I would think I could look inside to determine which version I have. According to this link I found on this site. http://www.tek-tips.com/faqs.cfm?fid=2173 But my main question is...
  6. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    Thank you Roldan! I open the door and I find two cards plugged into the control unit. The small card on the left says "DR5" Rel 02 and on the right is a longer card which I believe is a switch, which has a small white sticker that reads Rel 02 E NT5B27GA-93. Drum roll please for the final...
  7. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    Hello and sorry for the delay. Each box has a number in the upper right corner. I assume these are model numbers. If I am looking at the wall and in order from Left to Right the model numbers located on the left hand handside on each unit. M8X24DS - M12X0 - M0X16 - M0X16 - M0X16 - NAM Does...
  8. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    A R2.2 NAM will be copper so there will be 1 or 2 line cords connecting the NAM to the control unit." Norstar Meridian NT5B75AJ-93 R0642900 Model 4 Rel 03 02/23/96 s/n 41E18350785. Which has a modem card, two serial ports A and B, printer port, two PS2 ports and a floppy drive. This unit only...
  9. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    OK I will do that... Thanks for the help and thank you luv2ski, havent been snow sking in 10 maybe 15 years... http://www.tek-tips.com/viewthread.cfm?qid=982021&page=1
  10. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    Good Advice.. Who should I send it to? The engineer who came out yesterday was saying due to the switch that we are using with the phone system we could not upgrade. Is this true and should I find out what type of switch it is? If need be and if you do not mind I can give a list of...
  11. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    Did I post in the wrong thread? Should I have posted under Nortel Meridian Systems?? Thank you and exsmogger nice website! Good info.. Still looking up Control unit.. of to nortel site brb...
  12. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    What is the control unit? Where would it be or connected to? Thanks again Fraged
  13. fraged

    NAM, upgrade? ver 2.2 **Me=NewB**

    To: The Gods of this Forum First off, I want thank everyone who started this forum cause with out this forum and the people who actually give information to the unknowing we would be screwed. These days it is very hard to find people who are willing to share knowledge. THANK YOU for helping...

Part and Inventory Search

Back
Top