Search results for query: *

Thanks for the info!!

They have 2 PRIs but not a whole lot of call volume. Was thinking of having the calls ring out to the SA buttons instead of line appearances.

Customer is currently set up with 2 QCC operators and want to switch to DLC. How much reprogramming is involved to make this happen.

Will a Transtalk 9040 extended life battery fit into the auxilary charging slot on a Transtalk 9040 charger.

Thanks!! 800 works!!!

I failed to mention that the operator positions are set up as QCC.

Have a Merlin Legend with 2 operators. and the auto attendant answers all calls. Currently when you select to speak to the operator or zero out of the AA, it transfers out to ony one of the operators. Is it possible to have it ring to both?

I have a customer with a ACS R5 and the replace battery message appeared on the phones. I have replaced the batteries several times and the message will not go away. I even rebooted the system several times. Any ideas?

Have a Merlin Legend V7 with a Merlin Messaging. When a message is left in the voice mail box of any extension, It fails to light up the MWI. The system config is as follows: 0) Legend Processor 1) 008 MLX 2) 008 MLX 3) 800 GS/LS-ID 4) 100 DCD 5) Merlin Messaging Any Ideas??

We have finally outgrown our Merlin Legend (processor upgraded to Magix 2.2). We are now thinking about purchasing another Legend with Magix processor and networking the two together in the same closet. What equipment do I need to make this happen, and can I just connect the two switches with a...

I am able to get into the Intuity via passthru as craft, but when I get to the option to change the passwords for craft, sa, or vm, it gives me an error and goes back to the selection screen

I can get in via passthru, but I can't change the password for sa or vm. Am I missing a step?

Is there any way to change the login / password to the intuity via the passthru feature?

thanks td, I will give it a shot

I have a MLX 10D which I cannot get the message light to turn off. It does not currently have a mailbox assigned to it, and it will not let me delete the messages when I go thru the menu on the extension.

Thanks for the help Merlinman!

5 - 408MLX boards in the first cabinet and yes the messaging in in the last slot in the 3rd cabinet

Here is the second cabinet: Slot 1 100csu, Slot 2 100D, Slots 3+4 016 ttr, Slots 5+6 016 MLX. I want to replace the 016ttr in slot 4 with an 016mlx. The third cabinet has 5 016MLX boards and 1 8 port Merlin Messaging.

We are currently using a Legend system with the processor upgraded to a Magix 2.2. In our second cabinet, we have a 100CSU, 100D, 2 016 TTRs, And 2 016 MLX boards. We want to swap out one of the 016 TTR boards for an 016 MLX board. Does anyone see any problems or potential issues with that?

Thanks All !!!!!!