Search results for query: *

On a second note I have ran a chkdsk on C drive and tried again and it did not help Eric Whirlpool Corp.

I have a windows 2003 system, it boots fine and runs good. I am going to safemode because we have a problem with a application install, and the vender recommended to install in safemode. I am trying to boot it in to safemode, I do F8 and have picked safemode and safemode with network. and have...

i believe with dell you need to recreate the drive config in the raid card, that is the case for 1800's dells, WARNING but do not initialize the disks this will wipe the data off them If you have a test server try this there first second thing you can do if you cant get the old disks to...

second thing i would like to add is that, the Lotus Notes Minder will not use single signon from what i have ever see, and i run the single signon for the client Eric Whirlpool Corp.

and it runs as a service too i believe but Notes2008 was correct its something extra you have to select at install. Eric Whirlpool Corp.

additional info: When I go to file>application>properties it shows server as my notes server and not "local" like you would see from a local copy, I thought it might be local already but no luck from what I can see Eric Whirlpool Corp.

i agree with the misio, DFS will use domain name you will be fine to change the name, If you have a test DFS you could try it out there first and see what you need for workstation side. Eric Whirlpool Corp.

Over the years of getting new notes clients installed, I got more then one mail archive now. Is there a way to merge the data from NSF files together? so I can get one mail archive and not have 4 as I do now that makes it hard to retrieve old data. Eric Whirlpool Corp.

I upgraded my client from 8.0.0 to 8.5 and was trying to reconfigure it because it was not a real upgrade the install made me uninstall and reinstall. I wanted to make a offline copy of my inbox for travel but the option is grayed out, I am in my inbox I go to file>application>make available...

We have 2003 domain controllers running off of VMware seems to work good, I would recommend that you test it for your enviroment to make sure it works good for you. The draw back is Microsoft will not support Domain controllers on VMware. Eric Whirlpool Corp.

I dont belive it works with raid 5. I have done it on raid 1 because the data is the same on both drives. Raid 5 has parts of data on 3+ drives. Eric Whirlpool Corp.

There is software you can get that you boot up a floppy/cd to turn your drive back to all zero's. They seem to work well. Eric Whirlpool Corp.

I have director 5.10.3 running the vm management and updatexpress server deployments and ServeRAID addon. And sending all hardware alerts to Tivoli Enterprise Console. Eric Whirlpool Corp.

I am using 5.10.3 on a windows system with the Apache database to monitoring the hardware of my systems using director agent v3.1. And it seems to be stable. I have needed to restart the director service like twice because it went down but other then that no problems. Eric Whirlpool Corp.

I usually go from top to bottom of rack when starting a new rack. Adding ups/kvm switches/switches at the bottom. We leave no spaces in the newer racks, on some of our older racks we did for cabling because there was not cable room. I have never see a air flow problem but that would be a...

Well at different locations you are going to be looking at a lose in proformance for the network depending on what kind of connection you have to each of your locations. And lack of support at the different locations if they are far a part. On the plus side with more then one location you have a...

Well from what it sounds like is you had a two drives die in your array. The only real way to fix this problem is to get two new drives and rebuild the array and restore from backups :(. Eric Whirlpool Corp.

if you pull drive the data is there on the drive, then you put it back in and you can load the config again if you need to. I believe it is F5 I think to reload the config but it is the one with load config from drives. hope this helps Eric Whirlpool Corp.

The first thing I would do is to make sure you have a full backup before you try to add it to RAID 1. Then I would Shutdown the box pull both drives and power up with serveRAID CD and delete the array then restart put drives back in and go back in serveRAID CD and make your RAID 1. If you have a...

most of the time when new drives are put in they show up with a green + sign. try removing the ! icons ones are do a scan for new or ready drives. See if that works. Or if you dont need the information on the orginal drives you can reset the card back to factory defaults. Eric Whirlpool Corp.