Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. dbotts

    Cisco 2600, 2 Pix's, and a 2950

    Stupid, stupid. IP address conflict, as someone said earlier. Sorry for the run around.
  2. dbotts

    Cisco 2600, 2 Pix's, and a 2950

    *bump* What I did was eliminate the Pix 501 from the equation, and plugged the 2600 and Pix 515 into the switch. Everything worked fine. I adjusted the port for the Pix 501 to 10mb half-duplex, and after running just the 2600 and 515 for a few days, I plugged the 501 in to the switch on the...
  3. dbotts

    Cisco 2600, 2 Pix's, and a 2950

    I am doing NAT (static on the server VLAN, dynamic on the user VLAN) on the Pix 515. I am doing PAT on the 501.
  4. dbotts

    Cisco 2600, 2 Pix's, and a 2950

    Currently, I have a public facing 2600. The ethernet interface is directly connected to a Pix 515, which in turn has 2 interfaces going to 2 separate VLANS. We have a need to install a wireless network for guests to use. But in order to install a 4th interface to the Pix, we would have to...
  5. dbotts

    Pix 506 DMZ access help

    Thanks 308win. I actually had to deny ip any 192.168.50.0 255.255.255.0 (instead of 1). Thanks again!
  6. dbotts

    Pix 506 DMZ access help

    Hey all, We recently went from a Pix 501 to a Pix 506, so we could get a 3rd interface for a DMZ. But our goal evolved a bit, and what I want to do is use the DMZ to isolate the users from our servers, opening up the only the necessary ports. So the users are on the DMZ interface, using a...

Part and Inventory Search

Back
Top