Search results for query: *

I will have a DSL Modem provided from the telephone carrier. Is that all I need?

Will a Cisco PIX 501 Firewall allow me to connect to the internet via DSL and Site-to-site VPN to another PIX 515?

I have vpn users that connect from the outside. While connected, I need them to be able to access servers on my dmz. Please let me know what I'm missing. Here is the PIX configuration. Any help would be greatly appreciate. PIX Version 6.3(5) interface ethernet0 auto interface ethernet1 auto...

I have an inside router with the following networks: 192.168.1.0/24 205.128.1.0/25 10.1.0.0/16 My PIX 515 has the same : inside 192.168.1.111 intf2 205.128.1.85 dmz 10.1.1.100 We also have Microsoft ISA server that we use for web filtering and such. Some applications are next to impossible to...

There is another router for internet. I don't believe it is correct either. The serial interface has a 216 ip to connect to the ISP. The e0 interface also has a 216 ip that connects to a PIX firewall which has 3 interfaces. A 216, a 192, and a 205. There is also an ISA server which has a...

router1 has 2 interfaces. 192 and 205. They are both plugged into a switch. router2 has 2 interfaces. 10 and 205. They are both plugged ino the same switch. Some of the servers are plugged into the switch as well. Anything with a 10 ip address, is on VLAN10. Everything else is on the...

I am having a routing issue. I will start by drawing out the way the network is set up. Router 1 eth0 192.168.1.165 eth1 205.128.1.114 Router 2 eth0 10.1.1.1 eth1 205.128.1.113 Most of my clients are connected through the 192 network. I have a few server connecting through the 205...

Thank you very much. Working perfectly now. My only other question is how do I make the phone make a different sound when there is a new message. On my phone (analog), when I have voicemail, the dial tone skips letting me know I have new messages. Thank You, Cliff

I think I got the hunt changed to 444 but am unsure what command to type to change the fdn. I type: ld 10 REQ: CHG TYPE: 500 TN 20 12 ECHG YES ITEM ??? <----------what do I type here? Like I said, this is my first attempt at doing this. Thank you for your replies.

Okay I'm still kinda lost. The TN I need to add voicemail to is 20 12. The DN is 298. Our Voicemail DN is 444. I appreciate your reply but this is my first attempt at really doing anything with our PBX. Tired of paying our phone company 115.00 per hour to do simple things like this. Thanks...

I'm very new at this so please keep that in mind. I am needing to add a user to voicemail on the Nortel Option 11c PBX and also in Meridian Mail. I have the instructions for Meridian but not the PBX. I read something about FTR, FDN, and FNA but I have no idea what that means. If anyone...

I have a Cisco Aironet 1100 that picks up an IP address from my DHCP server. The problem is when I connect to the wireless network with any of my client computers, they cannot obtain an IP address via DHCP. If I plug an ethernet cable into the laptop and let it pick up an IP, then the wireless...

Nevermind I got it fixed. I needed to tell the PIX about my internal network and add a route on my router to pass traffic.

I have a TAC ticket submitted but thought I would ask here as well. I have to go out of town this week and need to be able to VPN into work. I have the VPN setup fine and currently have access to 2 of my unix servers for their applications. I have a remote control software (dameware), which...

Both subnets will have to connect through the e0 port. I'm open for suggestions on an alternative. Currently I have routing and remote access enabled on my 2003 server but I want to do away with this. Thank You

I have 2 subnets. 192.168.1.xxx and 205.128.1.xxx . Both are setup as private ranges in my organization. Currently I have routing and remote access configured on my 2003 server so that 205 people and see 192 people, but I do not want this. Is a Cisco 1602 R capable of routing the 205 range...