Search results for query: *

You need a 4 SIP Trunk license. You should be able to get it for less than $200. www.systemnet.ie/telephone-systems.htm

The DSP card comes with licenses on board. Thanks for the update. I'm very interested to see how it works out. www.systemnet.ie/telephone-systems.htm

It's a small world! How's business? Are you selling many systems over there? We've noticed things picking up a little bit here. The new NCP500X/V has helped a lot. www.systemnet.ie/telephone-systems.htm

Yep, we're based in Tallaght. www.systemnet.ie/telephone-systems.htm

Assuming the Linux fax server is connected as a SIP extension, can't you use T.38 between fax server and TDE100 then back to normal fax tones after breaking out onto ISDN or PSTN? www.systemnet.ie/telephone-systems.htm

The VoIP codecs distort the fax tones (G.711 is not too bad), so the only reliable way to do it is to send the fax signals out-of-band using T.38 protocol. www.systemnet.ie/telephone-systems.htm

That link is gone straight into my favourites. Fair play to ya rivet. Thanks a million! www.systemnet.ie/telephone-systems

There is a separate programming tool for the KX-TVM. You can only get the programming tool from Panasonic through your dealer. We normally get them on training courses or by logging onto our dealer site. The installation file is 111MB so I don't know how I would get it to you. www.systemnet.ie

If you have the programming tool, you can also reset password on any mailbox by selecting 'Mailbox Settings' then select the mailbox and click on 'Edit Mailbox'. www.systemnet.ie

On the shortcuts down the left had side of the screen, select 'System Security'. On that screen, you can change the passwords for both the System Managers Mailbox and the Message Managers Mailbox. www.systemnet.ie

When you can't get into the System Manager's Mailbox (999), the only way around it is to reset the password using the programming tool. You didn't mention the voicemail unit model (KX-TVP, KX-TVM, ?). www.systemnet.ie

No problem. I know what you mean, our customers won't update their systems unless their blown off the wall with lightning! Come on God... unleash your wrath! www.systemnet.ie

Best I can come up with is an KX-T308 manual (hard copy). The programming steps should be similar. What do you need? I could maybe scan a few pages or post some programming steps here if you want. Date & Time: [00] Day ringing: [08] Night ringing:[09] See if those programs match up and let...

So... (I'm learning here!) in US a 6 pin telco plug is RJ-14? www.systemnet.ie

Sorry, I forgot to mention that feature is restricted by default. From memory, I think you need to have a look in program [703] to enable it per extension. www.systemnet.ie

Just to be clear, you would store [551] for door one. www.systemnet.ie

Not on the same button as the doorphone call button, but you could store [55] and the door opener number under a PF button. Then you have a door opener button. www.systemnet.ie

I do a bit of Nortel meself, but mostly panasonic telephone systems. How many pairs each extension will use depends on the type of phones you are connecting. The Panasonic Analogue Proprietry Telephones (APTs) use two pairs (Pins 2&5, 3&4 on RJ11), while the Panasonic Digital Proprietry...

Press [Program] Press the PF button Press [2] Enter [31] and the doorphone number (1-4) Press [Store] That button will allow you to call the doorphone, then just hit 5 on the telephone keypad to open the door. www.systemnet.ie

Not sure where it's going wrong but if I was doing it from scratch, here's how I would do it: In program [001] store the incoming DDI in any location between 500 and 699. By default all these locations are pointing at Call Handling Table 01 (Day & Night) in program [024]. The ringing...