Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tshunn

    How-to route 2 internet connections to pix firewall

    Thanks for the advice. Even though I have 2 T1s, they are from that same provider. I'm thinking about just having them reconfigured so that they are redundant instead of each haveing unique traffic and subnets. That should make things easier. I don't really know why they configured...
  2. tshunn

    How-to route 2 internet connections to pix firewall

    lgarner, Your diagram of my configuration is correct. I have the two 2610 routers connected to my 3550 which is then connected to my pix 515E. I didn't know that the 2610's would support HSRP. I'll have to look into that more, as that would really help in this situation. The NATing might be...
  3. tshunn

    How-to route 2 internet connections to pix firewall

    I have a pix 515E with only two interfaces, an inside and an outside, but I need to connect two T1 internet connections on different subnets to the outside interface. I have a Cisco 3550 switch on the outside between the routers and the pix. I've been told to use the HSRP on the 3550, but I...
  4. tshunn

    How-to Config Pix 515E for 2 outside internet connections

    I have looked into that, but my routers don't support HSRP, but the 3550 switch does. I just don't know if I can set it up between the firewall and the routers to accomplish the same thing. I'll try posting this in the router fourm. Thanks.
  5. tshunn

    How-to Config Pix 515E for 2 outside internet connections

    I have a pix 515E with only two interfaces, an inside and an outside, but I need to connect two T1 internet connections on different subnets to the outside interface. I have a Cisco 3550 switch on the outside between the routers and the pix. I've been told to use the HSRP on the 3550, but I...

Part and Inventory Search

Back
Top