Search results for query: *

One of our customers has a IP 500v2 9.0.3 also having the same issue with the system rebooting. The IPO rebooted 16 times this morning but has been stable for the last 3 hours. throws the same error message every time: FATAL DSI Exception address=00000014 d=5 pc=f0341760 f040deb8 f0341a70...

I DOWNGRADED to .57 at this point - and the phantom ringing has now stopped. What I observed through system monitoring is that we are still getting Incoming Abandoned calls every 30 minutes on Line 1 - which is the POTS... BUT, the IP Office is not seizing the line now. Before it was seizing...

We also have 2 customers running 8.1(63) and analog trunks experiencing the same issue....

Finally had a chance to test it on a second pc and the personal tab was there. Turned out to be an issue with the browser on the test pc.

6.0(8) IP500 version 2

This is the first time I have seen this myself.

Just installed one-x portal v6_0_21 and everything is operating as it should, until I noticed I have the System and External directory tabs but no Personal tab. Any ideas on how to get that to appear? The IPO is an IP500 V2 6.0(8)

wouldn't that bypass my ARS table?

I have several extensions routing thru an ARS with a call length limit of 5 minutes. Is there any way to route the outbound call thru VM Pro to play an announcement before the calls goes out?

Thanks K. We have not set the VM Pro up yet, just checking before we started the install.

Anyone run into any issues with VM Pro running on a Server 2008 Box?

Have an existing 4 site SCN with the main site being a 412 and will be adding a 406 to a 5th site. For testing, I would like to setup 406 and add it to the SCN on the same local network as the 412. The IP Lines just need to point to each IP Office but what about the IP Routes? The traffic will...

Do you have the same limit on 3.2?

What are the limits as far as users and mailboxes?

Coverage would work if the other users did not need to have access to the appearances.

Running IPO v4.2(4) and have incoming calls routed to and extension with 6 call appearances and the box next to Reserve Last Appearance is checked. There are 3 other phones which have 5 bridged appearances off of the 1st. The 4 phones should be able to receive 5 incoming calls and the 6th call...

I get the following error message after checking the Pop Outlook option in PMP: Outlook Cannot Be Configured!

Pete Nasty

Did some testing today. Took receptionist out of the collective hunt group and had the calls ring directly to her extension. Did not have a single issue transferring calls. Set the calls back to ringing the hunt group and the problems returned.

Have tried it using transfer, drop button as well as hanging up with the same result. Her phone was set up via user rights. I removed her from the user rights, reprogrammed the extension and rebooted the switch and still have the issue. Just a note, she also is using softconsole and you wind up...