Good morning,
We have 3 Cisco 7970 phones that share a non DID internal number (10 digit). The number is 1006746334. The number appears on the 3 phones and rings when the zero out option selected from their call handler. This works but when calls ring to the phones, it says "unknown number"...
Good afternoon.
Looking for a strobe solution that we can connect to a Cisco 7941 set. This set is connected to a POE switch. Anyone ever add one of these devices or know of one that is compatible>
Thanks,
Dave
Good afternoon,
I have a Cisco 2921 Router (CUCM ver. 10.5) set up with both 4 port FXS and FXO cards. We are working to get a door entry system to work. Here is how it should work:
Out side ring down extension should ring to several phones. This is working fine.
Users should then hit...
I dont believe it is. I did a show run on the VG and here is what I got:
dial-peer voice 10 pots
service stcapp
port 0/0
!
dial-peer voice 21 pots
service stcapp
port 0/1
!
dial-peer voice 22 pots
service stcapp
port 0/2
!
dial-peer voice 23 pots
service stcapp
port 0/3
I dont see...
Good afternoon,
I have an analog phone, associated with a VG port. When the user attempts to call into a Verizon Conference bridge, any bridge, he can dial the 800 number to access the bridge just fine. When he attempts to enter his 7 digit passcode, it does not recognize the passcode. Its...
Good afternoon,
Unity Connection 10.x
I have a general mailbox built with a made up alias. Everything works fine. I have two users that want to get notified when there is a message in the general mailbox. They would like to have email notification. Looking for the best way to accomplish...
Anyone ever set up a Dialogic Media Gateway 1000 AKA PIMG device
I have a Nortel Option 11 trying to connect to a Cisco Unity server. I have set a few of these up before but this one is taking the cake! I can test from the PIMG back to my 2616 sets on the Option 11. I can ping to the Unity from...
Mailboxes are built on our corporate Unity system. Users are on a remote Nortel Option 11. We have implemented a PIMG device to integrate between the TDM PBX and the Cisco Unity. I am attempting to set up a test mailbox before I have the site dial in to set up their mailboxes. I am dialing to...
Good morning,
Cisco Unity 10.5
Just created a new VM partition, with mailboxes. Calling Search Space, phone system settings, port group as well as ports have been built and gone over several times for accuracy. When trying to set up a test mailbox, dialing a remote access number, I can put...
Yes we have ran some debugs and nothing standing out. Had telco back out again this morning. Issue seems to clear when removed from the router. Returns when reconnected. We have replaced the gateway modules with the same issue. This is the same circuit we had on our TDM switch before it was...
Good morning,
I have a CUCM 8.6.2.
New site has a a MGCP gateway built with a local PRI (N12, B8ZS ESF
All seems to be working great except for on inbound calls, callers hear a brief amount of bursty static, then it clears and all is good for the rest of the call. This is happening only on...
Hey guys,
This site is a remote location supported by a legacy CO who has limited ability. That is why they have analog DID trunks.
I just spoke with a tech out on site and have to make a couple of corrections here.
The site has 4 digit extension numbers and not 3 digit. They also have DID...
Howdy from Seattle
Been a long while since I worked on a Nortel BCM. I have a BCM 400 3.7. Site has a DID which appears on their line 2. Each phone also has a 3 digit extension number. Site for some reason, when dialing extension to extension dial the 4 digit DID instead of the 3 digit...
Good morning,
I have a user that currently call forwards her extension to another extension after 4 rings instead of forwarding to voicemail like most users do. She is looking to forward to that extension if she does not answer and it that extension is RNA also, she wants it to roll to a...
Greetings from Seattle
Have a 7915 side card on a Cisco 7962 phone set. The side car currently has local partitioned users appearing on it as BLF. The local extensions work and we can see call activity. They want to put a couple of users from another partition on that 7915 so they can see who...
Good morning,
Enterprise Call Mgr with several locations. All sites have experienced the day light savings time change as expected except for our location in Saskatchewan. Apparently, they do not do the daylight savings time dance. Anyway we can configure this location from changing times...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.