Search results for query: *

Anyone knows how to fix/change SIP headers? Sometimes, some endpoints, located behind a NAT, don't make STUN sucessfully. As result, these endpoints register on SIP servers with private IP address. I've experienced it with some softphones too, like XLite. I've logged some ethereal captured...

I had a similar problem with media gateway. Instructions from Ericsson support was to send the MG to factory, for maintenance. See ya

Hello, I'm working in a MX-ONE server V.3SP2, that Compact SM version (server + media gateway). The main goal of my customer is to put the server on public internet, as SIP registrar, and make some SIP ata's register on it. But I have experienced some problems, when the ata is behind a NAT or...

Hi, This is MX ONE V3.0 sp2 connected to MD110 BC12 ISDN. It's working well. /* DSS1 (User MD110 ) from link 0 to link 1 */ ROCAC:ROU=x,TRM=4,TRAF=00151515,SEL=7110000010000010,SIG=311110000030,SERV=2101000007,BCAP=111111; RODAI:ROU=x,TYPE=SL60,VARI=00000000,VARO=044100E0,VARC=00200310; /*...

Anyone knows how to activate transfer on DRG22i IP extensions? Thanks, GTW

Unfortunately we always have this kind of problem here in Brazil in some pbx. The only solution is RFEXI, but in BC12 I think the system will ask for reload, so it's very dangerous if you don't have any valid dump on HDU.

Hi Pete, You're right, we always log off operator before restart anything. And RFEXI is not usual, only in case of blocked operator in busy state. But it's a simple system, only 1 lim with 3 magazines. So RFEXI doesn't affect very much all the system. My god, 15 lims on BC7 ...

Hello whosrdaddy, In fact the current version is BC7.2 Sorry, I wrote wrongly in my question. Best regards,

Hello OmniS3Tech, Thanks a lot for your answer, I'll check out the firmware on operator console. Maybe we changed the console and didn't replaced with the correct revision. Well, every call from PSTN (DID) to the operator that have problems, generate a lost signal on HIEDP. It's always from...

Only RFEXI releases this blocking.

Hi megglesfield Call type was set to 7 (direct indialling) and OACC was already set equal to numtyp=OD. <OPCTP:CORG=ALL; OPERATOR CALL TYPE DATA CORG CALT ROU OACC CUST NDIR RERNUM CEN 1 5 1 - - Y 8066 N...

Hi folks, I have a customer with a very very very old md110 version, BC7.0a We have a crazy defect on this pabx. Operator console (Type=1) doesn't accept DID (TL30) calls on Public Common Number (numtyp=CP) or on its Individual Operator number (numtyp=OI). When I call the operator, from PSTN...

I'VE NEVER HEARD ABOUT NLOG ON BC9 (OR LOWER) IN BRAZIL, THERE IS NO KIND OF PATCH THAT DO IT. I DON'T KNOW IN OTHER COUNTRIES. CHEERS!